Skip to main content

Cheapest Way to Build a House: 12 Ways to Cut Costs

The cheapest way to build a house is to build a smaller home with a simple rectangular footprint and a simple roof, use an existing plan or your own plan instead of a fully custom architect design, and keep finishes standard. Depending on the region, conventional new homes are often quoted at roughly $130 to $280 per square foot (about $1,400 to $3,000 per square meter), while a finished barndominium can come in at around $80 to $120 per square foot for a standard finish.

Kit homes and acting as your own general contractor can lower the price further, but they shift more work and risk to you. In my experience, the biggest savings are decided on paper, long before the first concrete truck arrives: size, shape and a finished plan matter more than any single bargain on materials. The figures below are national US ranges from 2024 to 2026 sources. Local prices vary a lot, so use them for orientation and confirm them with local builders.

Single-story ranch house with wraparound porch designed in Plan7Architect, overview 2
Single-story ranch house with wraparound porch designed in Plan7Architect, overview 2

Where the Money Goes

Knowing where the money goes shows where cutting actually works. According to the NAHB Cost of Constructing a Home survey for 2024, construction costs made up about 64 percent of the sales price of a typical new home, and the finished lot about 14 percent. Within construction costs, the largest shares were:

Construction stage Share of construction cost
Interior finishes (cabinets, flooring, fixtures, paint) about 24 percent
Major system rough-ins (plumbing, electrical, HVAC) about 19 percent
Framing about 17 percent
Exterior finishes (siding, roofing, windows, doors) about 13 percent
Foundations about 11 percent
Site work about 8 percent
Final steps (landscaping, driveway, cleanup) about 7 percent

Labor is part of almost every line. Angi estimates that labor accounts for roughly 30 to 50 percent of total homebuilding costs, which is why designs that are fast to build save more than they first appear to.

Cost per Square Foot by Building Approach

The way the house is built changes the price per square foot considerably. These are typical national ranges; your actual cost depends on the region, site and finish level.

Approach Typical cost What to keep in mind
Conventional stick-built house about $130 to $180 per sq ft (Houseplans.com), $180 to $280 per sq ft for a basic home (HomeGuide) Land not included; custom homes can cost much more
Barndominium, finished (turnkey) about $65 to $160 per sq ft, standard finish $80 to $120 Savings of roughly 15 to 25 percent compared with a traditional house, not half
Barndominium, erected shell on slab about $30 to $50 per sq ft Shell is only about 30 to 40 percent of the finished cost
Kit home, base kit about $40 to $80 per sq ft for the kit Foundation, assembly, systems and interior finishes are extra and can roughly double the kit price
Stock house plan about $1,000 to $3,000 per plan set Modifications and site adaptation cost extra
Custom architect design about $10,000 to $60,000 for a full custom home Often 8 to 15 percent of construction cost

12 Ways to Build a House for Less

1. Build Smaller

Every square foot you do not build saves the full cost of that square foot, plus the heating and maintenance it would need for decades. A well-planned 1,400 square foot (about 130 square meters) house with no wasted hallway space can live larger than a poorly planned 1,800 square foot (about 167 square meters) house. Check the real space you need with a room size guide instead of guessing.

2. Keep the Footprint Simple

A rectangle or a square is the cheapest shape to build. Every extra corner adds foundation work, framing, flashing, siding cuts and roof complexity. An L-shape or a bump-out may look nicer, but it should earn its cost.

3. Choose a Simple Roof

A plain gable roof over a rectangular house is usually the most economical choice. Hips, valleys, dormers and intersecting roofs add materials, labor and potential leak points.

4. Build Up Instead of Out

For the same living area, a two-story house needs a smaller foundation and a smaller roof than a single-story house. It does need stairs, and on some sites a single story is simpler, so compare both versions for your lot before you decide.

5. Group the Plumbing

Placing the kitchen, bathrooms and laundry back to back, or stacking bathrooms above each other, shortens pipe and drain runs. Plumbing, electrical and HVAC together make up about a fifth of construction costs, so compact service zones pay off.

6. Use a Stock Plan or Draw Your Own

A stock plan typically costs about $1,000 to $3,000, compared with tens of thousands for a full custom design. Drawing your own plan first and then having it reviewed or finalized by a professional is another way to keep design fees down. Our comparison of stock house plans vs. designing your own explains the pros and cons, and our guide on how much an architect costs shows what full design services add.

Transparent 3D view of a ranch house with porch designed in Plan7Architect, angled view
Transparent 3D view of a ranch house with porch designed in Plan7Architect, angled view

7. Finish the Plan Before You Build

Change orders during construction are one of the most expensive ways to build a house. Moving a wall after framing or adding a window after siding means paying for the work twice. A complete plan with exact dimensions, window positions and room sizes lets builders price the same project and keeps surprises small.

8. Choose Standard Sizes and Mid-Range Finishes

Interior finishes are the largest single share of construction cost. Standard window and door sizes, stock cabinets, and durable mid-range flooring save money without making the house feel cheap. Spend more where you touch things every day, such as the kitchen counters and the front door, and less elsewhere.

9. Consider a Kit or Panelized Home

Kit homes deliver pre-cut or pre-built components, which can shorten construction time. Remember that the kit price usually excludes land, foundation, assembly labor, plumbing, electrical, drywall and flooring. Our guide on creating a kit house floor plan helps you check whether a kit layout really fits your needs.

10. Consider a Barndominium or Post-Frame Build

Steel or post-frame buildings with a simple rectangular shell can be cheaper per square foot than a conventional house, especially with an open layout. Insulation, interior walls and finishes are still a large part of the budget, so the savings are real but moderate.

11. Act as Your Own General Contractor, Carefully

General contractors typically work on margins of roughly 7 to 20 percent. Managing the subcontractors yourself can save part of that, but Building Advisor estimates realistic owner-builder savings closer to 10 percent than 20 percent, and you carry the risk of delays and mistakes. Financing can also be harder to get, so check with your lender first.

12. Do Some of the Finish Work Yourself

Painting, installing flooring, trim, landscaping and simple decks are typical sweat-equity tasks. Leave structural, electrical, plumbing and gas work to licensed professionals, and check with your building department which work owners may do themselves in your area.

Tip: Ask builders to price two versions of your plan, for example a single-story and a two-story layout with the same living area. The difference is often larger than any discount you can negotiate on materials.

Do Not Forget Land, Site and Foundation

The cheapest house plan can still become expensive on a difficult lot. Steep slopes, poor soil, long utility connections and a missing septic or sewer connection can add tens of thousands of dollars. A slab foundation on a flat lot is usually less expensive than a full basement, although a basement adds usable space that you would otherwise have to build above ground. Costs, codes and permit fees vary by state and county, so talk to your local building department early.

Furnished open floor plan of a single-story house in 3D designed in Plan7Architect, corner view 3
Furnished open floor plan of a single-story house in 3D designed in Plan7Architect, corner view 3

Plan Your House Yourself First

The cheapest way to build a house almost always starts with a precise plan. When you know the exact footprint, wall lengths, window and door sizes, roof shape and living area, every builder you ask can quote the same house, and you can compare prices fairly. You also avoid the change orders that come from details that were never decided.

With Plan7Architect, you can draw the house yourself with real walls, floors and roofs, see it in 3D, and compare plan variants such as a compact rectangle against an L-shape or a single story against two stories. The living and usable area calculation shows how much house each version gives you, so you can discuss it with builders on solid numbers.

Plan an Affordable House with Plan7Architect

With Plan7Architect Pro, you can create professional floor plans for a budget-friendly home: a simple footprint, compact plumbing zones, a straightforward roof, standard window and door sizes, and alternative layouts you can compare side by side in 2D and 3D. You can work in feet and inches or in metric units, calculate the living area, and export your plans as PDF, DWG or DXF to request comparable quotes from builders. Every purchase includes a 14-day right of withdrawal, so you can simply cancel your purchase by email if the software is not right for you.

Plan your project with Plan7Architect

Plan7Architect Pro

Plan7Architect Pro 5 for Original price was: $259.99.Current price is: $99.99.

You don’t need any prior experience because the software has been specifically designed for beginners. The planning process is carried out in 5 simple steps:

1. Draw Walls

Create your 2D floor plan by accurately drawing and adjusting rooms and walls for your home design.
Create your 2D floor plan by accurately drawing and adjusting rooms and walls for your home design.

2. Windows & Doors

Optimize your space layout with perfectly fitting door and window elements.
Optimize your space layout with perfectly fitting door and window elements.

3. Floors & Roof

Visualize different levels and roof types for your home design.
Visualize different levels and roof types for your home design.

4. Textures & 3D Objects

Choose materials and textures to customize floors, walls, and 3D objects individually for a realistic representation of your design.
Choose materials and textures to customize floors, walls, and 3D objects individually for a realistic representation of your design.

5. Plan for the Building Permit

Sections and views for the building application can be created with Plan7Architect (1)
Create professional construction drawings with elevations, sections, and complete plan compilations.

6. Export the Floor Plan as a 3D Model for Twinmotion

Visualize your project with cutting-edge 3D technology and create high-quality image renderings and videos using Twinmotion by Epic Games.
Visualize your project with cutting-edge 3D technology and create high-quality image renderings and videos using Twinmotion by Epic Games.

 

  • – Compliant with international construction standards
  • – Usable on 3 PCs simultaneously
  • – Option for consultation with an architect
  • – Comprehensive user manual
  • – Regular updates
  • – Video tutorials
  • – Millions of 3D objects available

Why 85,000+ Home Planners Choose Plan7Architect

Why choose Plan7Architect over other home design tools?

14-Day Money-Back Guarantee
No questions asked. Just email us within 14 days if you’re not satisfied.
One-time payment – no subscription
Own the software forever. No hidden costs. No monthly fees. Updates are optional.
Based on $2,500 professional architecture software
Plan7Architect is an optimized version — used by professionals and private users alike.
Supports international building standards
Adaptable to US, UK, Canadian, Australian, and European requirements.
Works offline – use on up to 3 devices
No internet required. Install on up to 3 computers – ideal for home and office use.
Metric & imperial units
Switch freely between feet/inches or meters/centimeters — perfect for global use.
++
All key export/import formats included
DWG, DXF, OBJ, 3DS, STL, PDF, image export/import, and SketchUp import — for smooth collaboration.
ii
Create real building permit documents
Generate floor plans, elevations, cross-sections, and full construction drawings.
Supports wood framing for walls and roofs
Design wall and roof structures, gables, dormers, and freely constructed wood frameworks.
Easy learning curve with full support
Includes video tutorials, ticket system, detailed PDF manual, sample projects, and access to our customer forum.
Excellent verified reviews
Top ratings on Trusted Shops and Amazon.
Ongoing development – 3–4 updates per year
Always improving, with a modern 3D engine and regular feature upgrades.

Watch how a complete house is planned from start to finish – in under 25 minutes

Detailed House Planning (25 Min)

Small Home Planning Demo (12 Min)

Short House Planning Demo (6 Min)

AI with Plan7Architect

Your Plan + AI

Plan your house in Plan7Architect and take it further with today’s AI tools. Your design stays exactly as you planned it.

3D view of a villa designed in Plan7ArchitectAI rendering of the same Plan7Architect villa

Plan7ArchitectAI

Photorealistic AI Renderings

Turn any 3D view of your Plan7Architect project into a photorealistic image in seconds.

How to render your design with AI →Free prompt generator with 11 examples →

AI Videos of Your HouseNew

A short film like real drone footage, made from your Plan7Architect 3D views.

How to create an AI video of your house →

Material list and cost estimate from a Plan7Architect plan with ChatGPT or Claude

Material List & Cost Estimate

Export your plan as DXF and let ChatGPT or Claude create quantities and a cost estimate.

How to create a material list →

Hand-drawn floor plan digitized with AI and imported into Plan7Architect

Digitize Floor Plans with AI

Paper, PDF or photo to an exact DXF file you can trace in Plan7Architect.

How to digitize floor plans →

The 3 Plan7Architects

$79.99

Suitable for small hobby projects

No garden planning and only limited floor plan creation with few wall types

7 reviews
★★★★★
$89.99

For medium-sized projects

Unrestricted floor plan creation & garden planning

No export options for your architect and no plans for building permit applications

11 reviews
★★★★★
Original price was: $259.99.Current price is: $99.99.

For projects of any size

Import & export for working with an architect

Create plans for real building permit applications

Much larger range of features than the other two versions

111 reviews
★★★★★
BestsellerPlan7Architect Pro 5Pro
Price
$79.99
$89.99
Original price was: $259.99.Current price is: $99.99.
Project size
Small hobby projects
Medium-sized
Any size
Floor plan creation
Limited
Garden planning
Import & export for your architect
Plans for building permit applications
Customer reviews
★ 4.77 reviews
★ 4.811 reviews
★ 4.8111 reviews

Verified Customer Reviews

Verified Customer Reviews

Trusted Shops:

Home » House Construction Costs » Cheapest Way to Build a House: 12 Ways to Cut Costs
Select your currency