Skip to main content

Second Story Addition Cost: What to Expect in 2026

A second story addition typically costs between $100,000 and $250,000 in the US, with national averages of around $175,000 reported by HomeAdvisor and Angi in 2026. Per square foot, most projects land at $100 to $300 per square foot (about $1,080 to $3,230 per square meter), and complex or high-end additions can reach $500 per square foot (about $5,380 per square meter) or more.

Adding a full second floor over an entire house is the expensive end of the scale: HomeGuide lists $200,000 to $750,000 and more for a full second floor, depending on size, region and finishes. A partial second story over one part of the house, such as a new primary suite above the garage or the living area, is usually much cheaper.

The second story addition cost on your project depends less on the new floor area than many people expect. The condition of the existing foundation and framing, how the roof comes off, where the new staircase goes and how much plumbing has to run upstairs often make the biggest difference. When I plan an addition, I always look at those points first, because they decide whether the budget holds.

Three-story house with mansard roof and dormers designed in Plan7Architect, side view
Three-story house with mansard roof and dormers designed in Plan7Architect, side view

Second Story Addition Cost at a Glance

The figures below are national ranges from current cost guides. Prices in high-cost metro areas can be considerably higher, and rural areas are often lower.

Cost item Typical range
Typical total project $100,000 to $250,000 (average around $175,000)
Cost per square foot $100 to $300 (about $1,080 to $3,230 per square meter), up to $500 or more for complex projects
Full second floor $200,000 to $750,000 and more
Partial second story $60,000 to $250,000 and more
Second story over a garage $60,000 to $200,000 and more
Structural engineer About $550 for a basic assessment; $100 to $220 per hour, design work $500 to $3,000 and more
Building permits $1,200 to $2,000 in many areas
Foundation reinforcement From about $5,000; major foundation work $2,000 to $20,000 and more
New main staircase About $1,000 to $5,000
General contractor fee 10 to 20 percent of the construction cost

Different cost guides use different methods, so their numbers do not always match. Treat these values as a starting point for your budget, not as a quote.

Second Story Addition Cost per Square Foot

For a first rough budget, multiply the planned floor area by a per-square-foot rate. Angi and HomeAdvisor work with $100 to $300 per square foot (about $1,080 to $3,230 per square meter) for typical projects, while HomeGuide calculates $200 to $500 per square foot (about $2,150 to $5,380 per square meter) for a full second floor including materials and labor.

New floor area Typical project (Angi / HomeAdvisor) Full second floor (HomeGuide)
800 square feet (about 74 square meters) $80,000 to $240,000 Not listed
1,000 square feet (about 93 square meters) $100,000 to $300,000 $200,000 to $500,000
1,200 square feet (about 111 square meters) $120,000 to $360,000 $240,000 to $600,000
1,500 square feet (about 139 square meters) $150,000 to $450,000 $300,000 to $750,000
2,000 square feet (about 186 square meters) $200,000 to $600,000 $400,000 to $1,000,000

The 1,200 and 2,000 square foot values in the middle column are simply the $100 to $300 rate applied to that area. Adding a story usually costs more per square foot than new construction, because the roof comes off and new structure and systems must tie into the old house.

Full vs. Partial Second Story

Full Second Story

A full second story covers the entire footprint of the house and roughly doubles the living area. It gives you the most space for the money per square foot of new floor, because the costs for removing the roof, setting up the site and getting permits are spread over a larger area. On the other hand, the whole roof comes off, the family usually has to move out, and the structural requirements are highest. Angi gives a timeline of about six to twelve months for a full addition.

Partial Second Story

A partial second story sits over only one part of the house, for example over the garage, over a wing or over the living room. Typical uses are a primary suite with bathroom, a home office or a bonus room. The total cost is lower, and Angi estimates about three to six months of construction. The cost per square foot can actually be higher than for a full floor, because many fixed costs stay the same while the new area is smaller.

Alternatives with Less Structure

If you only need one or two rooms, a dormer addition or an attic conversion may be enough. HomeGuide lists dormer additions at about $19,600 to $54,900, and Angi gives a dormer average of around $12,000 for simpler projects. Whether this works depends on the existing roof pitch and the available headroom, so it is worth checking before you commit to a full addition.

Structural Checks Before You Build Up

The single most important question is whether the existing house can carry another floor. Many single-story homes were built with foundations and walls sized only for one story and a roof.

  • Foundation: A structural engineer checks whether the footings can take the extra load. Reinforcement starts at about $5,000, and serious foundation work can cost far more.
  • Walls and framing: Exterior and interior bearing walls may need additional studs, new headers or posts down to the foundation.
  • Beams: Where a new wall above does not line up with a wall below, a beam is often required. HomeGuide lists steel beams at about $100 to $400 per foot (about $330 to $1,310 per meter).
  • Soil: In some regions or on difficult ground, a geotechnical report is requested, typically $1,000 to $5,000.
  • Roof and ceiling: The existing ceiling joists usually become floor joists, and they are often too small for floor loads.
Tip: Ask for the structural assessment before you pay for detailed design work. If the foundation needs major reinforcement, it may be cheaper to build a partial second story over the strongest part of the house or to add space on the ground instead.
Transparent 3D model of a multi-family house with mansard roof designed in Plan7Architect, side view
Transparent 3D model of a multi-family house with mansard roof designed in Plan7Architect, side view

Permits, Design Fees and Other Costs

A second story is a major structural change, so a building permit is required practically everywhere. HomeAdvisor and Angi list permit fees of about $1,200 to $2,000, while HomeGuide notes that many jurisdictions calculate permits as a percentage of the project value. Height limits, setbacks and design guidelines from your local planning or zoning office can also affect whether and how you can build up, so check these rules with your local building department early.

Typical additional costs include:

  • Architect or residential designer: HomeAdvisor lists architect fees of 8 to 20 percent of the project cost, and HomeGuide gives hourly rates of $100 to $250. Our guide on how much an architect costs explains the fee models in detail.
  • Construction drawings: HomeGuide lists blueprints at about $1,200 to $5,000, and HomeAdvisor gives an average of about $1,740 for drafting.
  • New roof: After the walls are up, the new roof is a significant cost. Angi and HomeAdvisor list roofing at about $4.35 to $11 per square foot (about $47 to $118 per square meter).
  • Staircase: A new main staircase costs roughly $1,000 to $5,000, but the space it takes on the ground floor is often the bigger issue.
  • Temporary housing: For a full second story, most families move out for several months. Rent or hotel costs are not in the construction price, but they belong in your budget.
  • Landscaping repair: Scaffolding and material storage damage the yard. Angi lists restoration at about $4.50 to $12 per square foot (about $48 to $129 per square meter).

What Drives the Cost Up or Down

Location

Regional differences are huge. Angi lists full second story additions in Los Angeles at $500,000 to $1,000,000, while ranges in Houston start at about $300,000. Labor makes up about 30 to 50 percent of the budget, so local wages matter more than material prices.

Stairs and Ground Floor Changes

A straight staircase with 36 inches (about 91 cm) of width and a typical floor height takes up a footprint of roughly 3 by 10 to 12 feet (about 0.9 by 3.0 to 3.7 m), plus landings at the top and bottom. Finding that space often means changing rooms on the ground floor, which adds cost. Placing the stairs in an existing hallway or at the edge of a large living area is usually the cheapest option. Our guide on planning a staircase shows how to calculate the run.

Bathrooms and Plumbing

Bathrooms upstairs are popular, but each one needs supply and drain lines that run down through the existing house. Stacking new bathrooms above the existing kitchen or bathrooms keeps those runs short and saves money.

Finishes and Complexity

Simple rectangular floors with a standard gable or hip roof are the cheapest to build. Many corners, large window walls, vaulted ceilings and premium finishes push the price toward the upper end of the ranges.

Build Up or Build Out?

Angi gives ground-level additions a range of about $20,000 to $80,000 for smaller projects, so building out is often cheaper for one or two rooms. Building up makes sense when the lot is small, setbacks leave no room to expand, or you want to keep the yard. Our article on the cost of a house extension in the US compares other addition types.

Transparent 3D model of a multi-family house with mansard roof designed in Plan7Architect, aerial view
Transparent 3D model of a multi-family house with mansard roof designed in Plan7Architect, aerial view

Plan Your Second Story Yourself Before Getting Quotes

The best way to keep a second story addition cost under control is to know exactly what you want before contractors price it. When every builder quotes on the same detailed floor plan, the offers become comparable, and you avoid expensive change orders once construction has started.

In practice, it helps to draw the existing house first and then add the new floor on top of it. You immediately see where the stairs fit, which walls line up from floor to floor, where the bathrooms stack and how the new roof will look from the street. You can also compare a full and a partial second story as two plan variants and check the living area of each, which makes the per-square-foot budget much more reliable.

With Plan7Architect, you can model the existing building with real walls, floors and ceilings, add the new story with adjustable ceiling heights, plan the staircase and build the new roof automatically. Sections and elevations show the overall height, which helps when you check local height limits. Our guide on planning a house extension upwards walks through the steps. Your engineer and contractor still handle the structural design and pricing, but they start from a clear, dimensioned plan.

Plan Your Second Story Addition with Plan7Architect

With Plan7Architect Pro, you can create professional floor plans for your second story addition and see the result in 2D and 3D at the same time. Draw the existing house, add a full or partial new floor, place the staircase, stack bathrooms, build the new roof and compare variants with automatic living area calculation. Sections and elevations show every height clearly. You can work in feet and inches or in meters and export your plans as PDF, DWG or DXF for your engineer and contractors. Every purchase includes a 14-day right of withdrawal, so you can simply cancel by email if the software is not right for you.

Plan your project with Plan7Architect

Plan7Architect Pro

Plan7Architect Pro 5 for Original price was: $259.99.Current price is: $99.99.

You don’t need any prior experience because the software has been specifically designed for beginners. The planning process is carried out in 5 simple steps:

1. Draw Walls

Create your 2D floor plan by accurately drawing and adjusting rooms and walls for your home design.
Create your 2D floor plan by accurately drawing and adjusting rooms and walls for your home design.

2. Windows & Doors

Optimize your space layout with perfectly fitting door and window elements.
Optimize your space layout with perfectly fitting door and window elements.

3. Floors & Roof

Visualize different levels and roof types for your home design.
Visualize different levels and roof types for your home design.

4. Textures & 3D Objects

Choose materials and textures to customize floors, walls, and 3D objects individually for a realistic representation of your design.
Choose materials and textures to customize floors, walls, and 3D objects individually for a realistic representation of your design.

5. Plan for the Building Permit

Sections and views for the building application can be created with Plan7Architect (1)
Create professional construction drawings with elevations, sections, and complete plan compilations.

6. Export the Floor Plan as a 3D Model for Twinmotion

Visualize your project with cutting-edge 3D technology and create high-quality image renderings and videos using Twinmotion by Epic Games.
Visualize your project with cutting-edge 3D technology and create high-quality image renderings and videos using Twinmotion by Epic Games.

 

  • – Compliant with international construction standards
  • – Usable on 3 PCs simultaneously
  • – Option for consultation with an architect
  • – Comprehensive user manual
  • – Regular updates
  • – Video tutorials
  • – Millions of 3D objects available

Why 85,000+ Home Planners Choose Plan7Architect

Why choose Plan7Architect over other home design tools?

14-Day Money-Back Guarantee
No questions asked. Just email us within 14 days if you’re not satisfied.
One-time payment – no subscription
Own the software forever. No hidden costs. No monthly fees. Updates are optional.
Based on $2,500 professional architecture software
Plan7Architect is an optimized version — used by professionals and private users alike.
Supports international building standards
Adaptable to US, UK, Canadian, Australian, and European requirements.
Works offline – use on up to 3 devices
No internet required. Install on up to 3 computers – ideal for home and office use.
Metric & imperial units
Switch freely between feet/inches or meters/centimeters — perfect for global use.
++
All key export/import formats included
DWG, DXF, OBJ, 3DS, STL, PDF, image export/import, and SketchUp import — for smooth collaboration.
ii
Create real building permit documents
Generate floor plans, elevations, cross-sections, and full construction drawings.
Supports wood framing for walls and roofs
Design wall and roof structures, gables, dormers, and freely constructed wood frameworks.
Easy learning curve with full support
Includes video tutorials, ticket system, detailed PDF manual, sample projects, and access to our customer forum.
Excellent verified reviews
Top ratings on Trusted Shops and Amazon.
Ongoing development – 3–4 updates per year
Always improving, with a modern 3D engine and regular feature upgrades.

Watch how a complete house is planned from start to finish – in under 25 minutes

Detailed House Planning (25 Min)

Small Home Planning Demo (12 Min)

Short House Planning Demo (6 Min)

The 3 Plan7Architects

$79.99

Suitable for small hobby projects

No garden planning and only limited floor plan creation with few wall types

7 reviews
★★★★★
$89.99

For medium-sized projects

Unrestricted floor plan creation & garden planning

No export options for your architect and no plans for building permit applications

11 reviews
★★★★★
Original price was: $259.99.Current price is: $99.99.

For projects of any size

Import & export for working with an architect

Create plans for real building permit applications

Much larger range of features than the other two versions

111 reviews
★★★★★
BestsellerPlan7Architect Pro 5Pro
Price
$79.99
$89.99
Original price was: $259.99.Current price is: $99.99.
Project size
Small hobby projects
Medium-sized
Any size
Floor plan creation
Limited
Garden planning
Import & export for your architect
Plans for building permit applications
Customer reviews
★ 4.77 reviews
★ 4.811 reviews
★ 4.8111 reviews

Verified Customer Reviews

Verified Customer Reviews

Trusted Shops:

Home » House Construction Costs » Second Story Addition Cost: What to Expect in 2026
Select your currency