The cost to build a deck in the US typically runs from about $4,300 to $12,700, with a national average of around $8,300 according to HomeAdvisor. Professionally built decks usually land between $30 and $60 per square foot (roughly $320 to $650 per square meter), with pressure-treated wood at the low end and composite, PVC or tropical hardwood at the high end.
What you actually pay depends mostly on four things: the size of the deck, the decking material, how high the deck sits above the ground, and how many feet of railing and stairs it needs. Labor alone is often $15 to $35 per square foot, so a simple, low deck can cost half as much as a raised deck of the same size. All figures below are national ranges from 2025 and 2026 cost guides. Prices in your area can be noticeably higher or lower, so treat them as a starting point for your budget and get local quotes.

Deck Cost per Square Foot by Material
The decking boards are the most visible part of the budget, but the framing underneath is usually pressure-treated lumber no matter which surface you choose. The table shows material-only prices for the decking itself, according to HomeAdvisor.
| Decking material | Material cost per sq ft | Typical average |
|---|---|---|
| Pressure-treated pine | $2 to $5 | about $3.50 |
| Cedar | $3 to $7 | about $5 |
| Bamboo | $3 to $10 | about $6.50 |
| Mahogany | $8 to $11 | about $9.50 |
| Tigerwood | $7 to $15 | about $12 |
| Ipe | $10 to $20 | about $15 |
| Composite | $12 to $22 (installed about $25 to $54) | about $17 |
| Redwood | $5 to $35 | about $17.50 |
| Aluminum | $15 to $20 | about $17.50 |
Wood vs. Composite
Pressure-treated wood is the cheapest way to build a deck and is easy for any carpenter to work with. The trade-off is maintenance: it needs cleaning and staining or sealing every few years, and boards can check and warp over time. Cedar and redwood look better and resist decay naturally, but they cost more and still need care.
Composite and PVC boards cost several times as much up front, but they do not need staining and hold their color longer. In my experience, homeowners who plan to stay in the house for many years often accept the higher price because they do not want to spend weekends refinishing the deck. If you compare the two, compare the total over ten or fifteen years, not just the price of the boards.
Labor and Framing
HomeAdvisor puts deck labor at about $15 to $35 per square foot, with framing adding roughly $9 to $12 per square foot. Labor tends to be lower for softwoods that are easy to cut and higher for very hard tropical woods such as ipe, which require pre-drilling and special fasteners.
Deck Cost by Size
Size is the most direct cost driver. The following ranges are complete project estimates from HomeAdvisor for typical rectangular decks.
| Deck size | Area | Typical total cost |
|---|---|---|
| 10 by 10 feet (about 3 by 3 m) | 100 square feet (about 9.3 square meters) | $4,000 to $6,000 |
| 12 by 12 feet (about 3.7 by 3.7 m) | 144 square feet (about 13.4 square meters) | $5,760 to $8,640 |
| 12 by 20 feet (about 3.7 by 6.1 m) | 240 square feet (about 22.3 square meters) | $9,600 to $14,400 |
| 16 by 20 feet (about 4.9 by 6.1 m) | 320 square feet (about 29.7 square meters) | $12,800 to $19,200 |
| 20 by 20 feet (about 6.1 by 6.1 m) | 400 square feet (about 37.2 square meters) | $16,000 to $24,000 |
If you are not sure how much space you actually need, our guide on how big a deck should be walks through furniture, grills and walkways. A deck that is a few feet smaller but well laid out often works better than a large, empty one.

Raised vs. Ground-Level Decks
Height changes the structure more than anything else. A ground-level deck needs minimal framing and usually no stairs or railings. A raised or second-story deck needs deeper footings, taller posts, bracing, a ledger connection to the house and, in most cases, guards on every open side.
| Deck type | Typical cost per sq ft |
|---|---|
| Ground-level deck | $10 to $20 |
| Floating (freestanding) deck | $20 to $60 |
| Multi-level deck | $30 to $75 |
| Second-story (raised) deck | $40 to $50 |
| Elevated deck on a concrete structure | $30 to $75 |
Under the International Residential Code, which many US jurisdictions adopt, guards are generally required where the walking surface is more than 30 inches (about 76 cm) above the grade below, with a minimum guard height of 36 inches (about 91 cm). Local rules can be stricter, so check with your building department before you finalize the height.
Railings, Stairs and Other Extras
Railings and stairs are where many deck budgets grow unexpectedly, because they are priced per foot or per step rather than per square foot of deck.
- Railings: about $35 to $210 per linear foot (roughly $115 to $690 per linear meter), depending on material. Pressure-treated wood is at the low end, while aluminum, cable and glass systems are at the high end.
- Stairs: about $25 to $50 per step for basic wood stairs; prefabricated wood stringers for 8 to 16 steps run about $160 to $560, custom wood stringers $280 to $800, and metal stairs $1,000 to $3,000.
- Permits: typically about $230 to $500, depending on location, size and height.
- Removing an old deck: about $5 to $15 per square foot, including disposal.
- Extras: built-in benches, planters, lighting, privacy screens, pergolas and hot tub reinforcement are priced separately and can add several thousand dollars.
A quick example shows why the perimeter matters. A raised 12 by 16 foot (about 3.7 by 4.9 m) deck attached to the house has about 40 feet (about 12.2 m) of open edge. At $60 per linear foot, the railing alone is about $2,400, before stairs. A ground-level deck of the same size might need no railing at all.
What Drives the Cost Up
Complex Shapes and Multiple Levels
Angled corners, curves and several levels look great, but every change in direction means extra cuts, extra framing and more waste. A rectangle is always the cheapest shape to build.
Difficult Sites
Steep or uneven ground needs taller posts and deeper footings on the low side. Poor soil, roots, rock and limited access for materials all add labor.
Board Direction and Patterns
Diagonal decking, picture-frame borders and herringbone patterns need more boards and more labor than boards running straight across the joists.
Changes During Construction
Moving stairs, widening a deck or switching railing systems after work has started almost always costs more than getting the design right on paper first.

Plan Your Deck Yourself Before You Get Quotes
The most reliable way to control the cost to build a deck is to know exactly what you are asking contractors to price. When every contractor quotes the same size, height, number of steps and length of railing, you can compare their prices directly instead of comparing three different interpretations of a vague idea. A precise plan also reduces change orders once the work has started.
With Plan7Architect, you can draw the deck as part of your house, set its exact dimensions and height, add stairs and railings, and check in 3D how it connects to doors, windows and the yard. Terrain modeling helps you see how a sloped lot affects the height of the deck, and the railing tools let you compare wood, metal and glass designs. If you want to see how Plan7Architect compares with other tools for this job, read our overview of the best deck design software.
Design Your Deck with Plan7Architect
With Plan7Architect Pro, you can create professional floor plans that include your deck with its exact size, levels, stairs, railings and foundations, and see the result immediately in 3D next to your house and terrain. You can try different shapes, materials and heights before you request quotes, work in feet and inches or in metric units, and export your plans as PDF, DWG or DXF for contractors and permit applications. Every purchase includes a 14-day right of withdrawal, so you can simply cancel your purchase by email if the software is not right for you.
Plan your project with Plan7Architect
Plan7Architect Pro 5 for Original price was: $259.99.$99.99Current price is: $99.99.
You don’t need any prior experience because the software has been specifically designed for beginners. The planning process is carried out in 5 simple steps:
1. Draw Walls

2. Windows & Doors

3. Floors & Roof

4. Textures & 3D Objects

5. Plan for the Building Permit

6. Export the Floor Plan as a 3D Model for Twinmotion

- – Compliant with international construction standards
- – Usable on 3 PCs simultaneously
- – Option for consultation with an architect
- – Comprehensive user manual
- – Regular updates
- – Video tutorials
- – Millions of 3D objects available
Why 85,000+ Home Planners Choose Plan7Architect
Why choose Plan7Architect over other home design tools?
Watch how a complete house is planned from start to finish – in under 25 minutes
Detailed House Planning (25 Min)
Small Home Planning Demo (12 Min)
Short House Planning Demo (6 Min)
Your Plan + AI
Plan your house in Plan7Architect and take it further with today’s AI tools. Your design stays exactly as you planned it.


Plan7ArchitectAI
Photorealistic AI Renderings
Turn any 3D view of your Plan7Architect project into a photorealistic image in seconds.
How to render your design with AI →Free prompt generator with 11 examples →
AI Videos of Your HouseNew
A short film like real drone footage, made from your Plan7Architect 3D views.

Material List & Cost Estimate
Export your plan as DXF and let ChatGPT or Claude create quantities and a cost estimate.

Digitize Floor Plans with AI
Paper, PDF or photo to an exact DXF file you can trace in Plan7Architect.
The 3 Plan7Architects
Suitable for small hobby projects
No garden planning and only limited floor plan creation with few wall types
★★★★★
For medium-sized projects
Unrestricted floor plan creation & garden planning
No export options for your architect and no plans for building permit applications
★★★★★
For projects of any size
Import & export for working with an architect
Create plans for real building permit applications
Much larger range of features than the other two versions
★★★★★
Verified Customer Reviews
More on this topic: House Plan & Building Costs – all articles
You might also like:
- Cost to Build a Garage: Detached and Attached Garage Prices
- Cost to Build a Small House: Budget Guide for Small Homes
- Create a Material List and Cost Estimate with ChatGPT or Claude – from Your Plan7Architect Plan
- Cost of House Extension per Square Foot – Complete Guide
- Cost of House Extension in the US





