A finished barndominium typically costs between $112,800 and $504,000 in the US, with a national average of roughly $230,000 according to 2026 cost data from Angi and HomeAdvisor. Turnkey builds with a standard finish usually land around $80 to $120 per square foot (about $860 to $1,290 per square meter), while a bare metal shell kit can start at about $20 to $35 per square foot (about $215 to $375 per square meter) for materials only.
The wide spread comes from three decisions: how much of the work you hand over (kit, erected shell or turnkey), how large the living area is compared with shop or garage space, and where you build. In my experience, people who compare quotes based on a detailed floor plan get much closer to their real number than those who start from a price per square foot alone.

Barndominium Cost per Square Foot
The price per square foot depends heavily on what is included. A steel kit price and a move-in-ready price are two very different numbers, and online offers often mix them up.
| Stage of completion | What is typically included | Typical cost per square foot |
|---|---|---|
| Metal shell kit (materials only) | Steel frame, roof and wall panels, trim, sometimes doors | $20 to $35 (about $215 to $375 per square meter) |
| Erected shell on slab | Kit assembled on a concrete slab, weather-tight exterior | $30 to $50 (about $325 to $540 per square meter) |
| Turnkey, standard finish | Complete home with insulation, interior walls, systems and finishes | $80 to $120 (about $860 to $1,290 per square meter) |
| Turnkey, high-end finish | Custom interiors, premium windows, upgraded kitchen and baths | $130 to $160 (about $1,400 to $1,720 per square meter) |
| Built through a general contractor | Full project management, all trades, finished home | $150 to $190 (about $1,615 to $2,045 per square meter) |
The shell usually accounts for only about 30 to 40 percent of the total cost. The rest goes into the foundation, insulation, mechanical systems, interior walls and finishes, which are the same trades you pay for in any other house.
Shell Kit vs. Turnkey Barndominium
Most barndominium projects follow one of three routes. Which one fits depends on your time, your skills and how much risk you want to carry yourself.
Shell Kit
A kit gives you the steel or post-frame structure and the exterior skin. Angi lists kit materials at roughly $20,000 to $90,000 and more, depending on size and building package. The kit does not include the foundation, interior materials, insulation, plumbing, electrical, HVAC or finishes, and custom doors and windows are often billed separately. Interior materials alone can add about $25,400 to $100,700 or more.
Erected Shell with Owner Finish
Many owners pay a crew to pour the slab and erect the shell, then finish the interior themselves or with individual trades. This can save the general contractor margin, which Angi puts at 10 to 20 percent of the project, but it means you coordinate inspections, schedules and deliveries yourself.
Turnkey Build
A turnkey builder delivers a finished home. It is the most expensive route per square foot, but the price is easier to compare, and one company is responsible for the result. Make sure every turnkey quote states exactly which finishes, appliances and site work are included.
Barndominium Cost by Size
The following ranges come from the 2026 cost tables of Angi and HomeAdvisor for complete builds. They describe national averages and can be noticeably lower in rural areas of the Midwest and South and higher on the coasts.
| Building size | Floor area | Typical total cost |
|---|---|---|
| 30 by 40 feet (about 9.1 by 12.2 m) | 1,200 square feet (about 111 square meters) | $112,800 to $144,000 |
| 40 by 60 feet (about 12.2 by 18.3 m) | 2,400 square feet (about 223 square meters) | $225,600 to $288,000 |
| 40 by 75 feet (about 12.2 by 22.9 m) | 3,000 square feet (about 279 square meters) | $282,000 to $360,000 |
| 60 by 60 feet (about 18.3 by 18.3 m) | 3,600 square feet (about 334 square meters) | $338,400 to $432,000 |
| 60 by 70 feet (about 18.3 by 21.3 m) | 4,200 square feet (about 390 square meters) | $394,800 to $504,000 |
These figures assume the whole floor area is finished living space. Many barndominiums combine a living area with a large shop or garage, and that unfinished part costs far less per square foot. A 40 by 60 foot (about 12.2 by 18.3 m) building with half of it as a shop will usually come in well below the full-living figure in the table. If you are still working out how to split the space, our barndominium floor plan ideas show common layouts with and without a shop.

What Drives Barndominium Cost
The steel structure gets most of the attention, but it is rarely what decides the final budget. These are the items that move the total most.
Land and Site Work
Angi puts the average land price at about $75,000, with a range from a few thousand dollars to well over $500,000. Site work such as clearing, grading, driveway and utility connections commonly adds $20,000 to $50,000. A rural lot that needs a well and septic system can cost considerably more to prepare than a lot with existing connections.
Foundation
Most barndominiums sit on a concrete slab, which is one of the reasons they can be economical. Angi lists foundation labor at roughly $4,000 to $12,500. Thicker slabs for heavy shop equipment, sloped lots or frost-protected footings in cold regions push the cost up.
Insulation
Metal buildings need careful insulation to control heat and condensation. Closed-cell spray foam for a home of around 2,000 square feet (about 186 square meters) often costs $15,000 to $30,000. Skimping here usually costs more later in heating, cooling and moisture problems.
HVAC, Plumbing and Electrical
Large open volumes and high ceilings often need bigger HVAC systems, which typically start around $12,500 installed. Plumbing and electrical costs depend mainly on the number of bathrooms, the kitchen and how far the wet rooms are spread across the plan.
Interior Finish Level
Drywall at about $1.50 to $3.50 per square foot (about $16 to $38 per square meter) and flooring at about $4 to $15 or more per square foot (about $43 to $160 per square meter) are where budgets quietly grow. Cabinetry, countertops and fixtures make the difference between a mid-range and a high-end result.
Location and Steel Prices
Labor costs and permit fees vary a lot between regions. Angi lists permits at around $1,200 to $2,000, but some counties charge more, and rules for residential use of metal buildings differ. Steel is also a commodity, so kit prices can change within months.
Is a Barndominium Cheaper Than a Traditional House?
Often, but not by as much as many people expect. Houseplans.com estimates the savings compared with a stick-built house at roughly 15 to 25 percent, with traditional homes at about $130 to $180 per square foot (about $1,400 to $1,940 per square meter). The savings come mostly from the simple rectangular footprint, the clear-span structure and the slab foundation.
Once you add the same kitchen, bathrooms, windows and insulation standard as in a conventional home, the gap narrows. The biggest real advantage is that a barndominium combines living space and a large shop or garage under one roof at a lower cost per square foot than two separate buildings.
Ways to Keep Barndominium Costs Down
- Keep the footprint simple: A plain rectangle with a single roof line is cheaper to frame, roof and insulate than an L-shape or multiple wings.
- Size the living area honestly: Every finished square foot costs several times more than shop space, so finish only what you really need.
- Group the wet rooms: Placing the kitchen, bathrooms and laundry close together shortens plumbing runs.
- Choose standard door and window sizes: Custom openings in metal buildings add cost quickly.
- Finish parts yourself: Painting, flooring or trim work are realistic owner tasks, while structural, electrical and gas work belong with licensed trades.
- Fix the plan before you sign: Changes after the shell is ordered are among the most expensive decisions in the whole project.

Plan Your Barndominium Yourself Before Getting Quotes
The most reliable way to control barndominium cost is to arrive at the builder with a finished floor plan. When every builder prices the same building size, the same room layout, the same window and door openings and the same porch and shop areas, the quotes become directly comparable, and you avoid costly change orders later.
With Plan7Architect you can draw the barndominium with real walls, openings, slab, roof and porches, divide living and shop areas, and see the result instantly in 3D. The living and usable area calculation gives you exact square footage for each zone, which is exactly what you need to check per-square-foot offers. Sections, elevations and DWG or DXF export make it easy to hand the plan to a builder or a designer who prepares the final construction documents. If you want to compare tools first, see our overview of barndominium design software, and our guide on stock house plans vs. designing your own explains when a custom plan pays off. For professional help on top of your own plan, it helps to know how much an architect costs.
Design Your Barndominium with Plan7Architect
With Plan7Architect Pro, you can create professional floor plans for your barndominium, from a compact 30 by 40 foot (about 9.1 by 12.2 m) home to a large building with an attached shop. Plan the slab, walls, windows, doors, roof, porches and interior layout, check the living and usable area of each zone, and walk through the result in 3D. You can work in feet and inches or in meters and export your plans as PDF, DWG or DXF. Every purchase includes a 14-day right of withdrawal, so you can simply cancel by email if the software is not right for you.
Plan your project with Plan7Architect
Plan7Architect Pro 5 for Original price was: $259.99.$99.99Current price is: $99.99.
You don’t need any prior experience because the software has been specifically designed for beginners. The planning process is carried out in 5 simple steps:
1. Draw Walls

2. Windows & Doors

3. Floors & Roof

4. Textures & 3D Objects

5. Plan for the Building Permit

6. Export the Floor Plan as a 3D Model for Twinmotion

- – Compliant with international construction standards
- – Usable on 3 PCs simultaneously
- – Option for consultation with an architect
- – Comprehensive user manual
- – Regular updates
- – Video tutorials
- – Millions of 3D objects available
Why 85,000+ Home Planners Choose Plan7Architect
Why choose Plan7Architect over other home design tools?
Watch how a complete house is planned from start to finish – in under 25 minutes
Detailed House Planning (25 Min)
Small Home Planning Demo (12 Min)
Short House Planning Demo (6 Min)
The 3 Plan7Architects
Suitable for small hobby projects
No garden planning and only limited floor plan creation with few wall types
★★★★★
For medium-sized projects
Unrestricted floor plan creation & garden planning
No export options for your architect and no plans for building permit applications
★★★★★
For projects of any size
Import & export for working with an architect
Create plans for real building permit applications
Much larger range of features than the other two versions
★★★★★
Verified Customer Reviews
More on this topic: House Plan & Building Costs – all articles
You might also like:





