Skip to main content

Sunroom Addition Cost: Prices by Type and Size

A typical sunroom addition cost in the US lands between about $22,000 and $75,000, with a national average of roughly $47,000 according to HomeAdvisor. Custom-built rooms usually run $150 to $300 per square foot (about $1,600 to $3,200 per square meter), while prefab kit rooms can start closer to $100 per square foot (about $1,100 per square meter) installed.

The biggest price driver is not the glass but the question of whether the room is a three-season room or a fully insulated, heated four-season room that counts as living space. Size, foundation, roof type, and whether you convert an existing porch or build from scratch decide the rest. When I plan a sunroom, I settle these points first, because they determine almost every line in the quote.

Single-story ranch house with wraparound porch designed in Plan7Architect, perspective
Single-story ranch house with wraparound porch designed in Plan7Architect, perspective

Sunroom Addition Cost at a Glance

The following ranges come from current national cost guides. They are averages, and prices in your region can be noticeably higher or lower.

Item Typical cost range
Average sunroom addition About $47,000
Typical project range $22,000 to $75,000
Three-season room $10,000 to $40,000
Four-season room $25,000 to $120,000
Custom build, per square foot $150 to $300 per square foot (about $1,600 to $3,200 per square meter)
Prefab kit, product only $6,000 to $40,000
Solarium (glass walls and roof) $30,000 to $75,000
Building permit $250 to $1,500

Labor typically makes up 40 to 60 percent of the total, so two rooms with identical materials can be priced very differently depending on the local labor market.

Three-Season vs. Four-Season Sunroom Cost

This is the decision that moves the budget more than any other.

Three-Season Rooms

A three-season room usually costs $10,000 to $40,000. It has a roof and walls of glass or screen panels, but little or no insulation and no connection to the main heating and cooling system. It is used from spring to fall and is often separated from the house by an exterior door.

Because it is not treated as heated living space, the walls, glass and foundation can be lighter, and in many areas the permit process is simpler. In my experience, a three-season room is the best value when you mainly want a bright, bug-free space for summer evenings.

Four-Season Rooms

A four-season room costs roughly $25,000 to $120,000. It needs insulated walls and roof, insulated double or triple glazing, a proper foundation, electrical outlets and lighting, and heating and cooling. Many owners connect it to the existing HVAC system or install a ductless mini-split, which Bob Vila lists at about $2,000 to $14,500.

A four-season room is a real addition to the house. It is usually built and inspected like any other habitable room, and it can add finished living area. Converting an existing three-season room to four-season use later typically costs $5,000 to $20,000 according to Fixr, so if you know you will want year-round use, it is usually cheaper to build it that way from the start.

Sunroom Kits vs. Custom-Built Sunrooms

Prefab Kits

Prefab or kit sunrooms are factory-made systems of aluminum or vinyl frames and glass panels. HomeAdvisor lists the product alone at about $6,000 to $40,000, and professional installation adds a large share on top. Kits are fast to install and predictable in price, but sizes and shapes are limited to what the manufacturer offers, and you still need a foundation or a suitable existing slab or deck.

Custom-Built (Stick-Built) Sunrooms

A custom sunroom is framed on site, usually with a roof that ties into the existing house, and finished to match it. At $150 to $300 per square foot (about $1,600 to $3,200 per square meter), it costs more, but you can choose any size, roof shape, window layout and flooring, and the result looks like part of the house rather than an add-on.

Tip: When you compare a kit quote with a custom quote, check what each one includes. Many kit prices cover only the frame and glass, while a custom quote often already includes the foundation, roof tie-in, electrical work and interior finishes.
Transparent 3D view of a ranch house with porch designed in Plan7Architect, overview
Transparent 3D view of a ranch house with porch designed in Plan7Architect, overview

Sunroom Cost by Size

Size has a direct effect on the price, because foundation, roof and glass all scale with the floor area. These ranges are based on the custom-build rate of $150 to $300 per square foot from HomeAdvisor.

Sunroom size Floor area Typical cost
10 by 10 ft (about 3 by 3 m) 100 square feet (about 9.3 square meters) $15,000 to $30,000
10 by 12 ft (about 3 by 3.7 m) 120 square feet (about 11.1 square meters) $18,000 to $36,000
12 by 12 ft (about 3.7 by 3.7 m) 144 square feet (about 13.4 square meters) $21,600 to $43,200
14 by 14 ft (about 4.3 by 4.3 m) 196 square feet (about 18.2 square meters) $29,400 to $58,800
12 by 20 ft (about 3.7 by 6.1 m) 240 square feet (about 22.3 square meters) $36,000 to $72,000
20 by 20 ft (about 6.1 by 6.1 m) 400 square feet (about 37.2 square meters) $60,000 to $120,000

A 12 by 12 ft (about 3.7 by 3.7 m) room is a popular size because it fits a small seating group or a dining table for four. If you want both, plan closer to 14 by 16 ft (about 4.3 by 4.9 m). The room size guide helps you check how much space your furniture really needs.

What Else Drives the Cost of a Sunroom

Foundation

A new sunroom needs a slab, a crawlspace or footings with a framed floor. Bob Vila puts the foundation at about $1,000 to $6,000 depending on size. Building on an existing concrete patio can save money, but only if the slab is in good condition and suitable for the load and local frost depth, which a contractor or engineer should confirm.

Glass and Roof

Glass is one of the largest cost items. Insulated low-E or triple glazing costs considerably more than single-pane panels, but it is what makes a four-season room comfortable in winter and summer. A solid insulated roof is cheaper and keeps the room cooler than a full glass roof, which is why many owners choose a solid roof with skylights.

Conversion vs. New Addition

Enclosing an existing porch or deck is often cheaper than building from the ground up, because the floor and sometimes the roof are already there. Fixr lists conversions at roughly $80 to $200 per square foot (about $860 to $2,150 per square meter), compared with $130 to $300 per square foot (about $1,400 to $3,200 per square meter) for new additions. The existing structure must, however, be able to carry walls and glass.

Electrical, HVAC and Finishes

Outlets, lighting, ceiling fans, flooring, blinds and the transition to the house all add up. Tile and luxury vinyl are common floor choices because they handle sun and temperature changes well.

Design Fees and Permits

Most sunroom additions need a building permit, typically $250 to $1,500, and processing can take several weeks. Some jurisdictions also require drawings stamped by a design professional for the structural parts. If you are unsure, the guide on what an architect costs gives an overview, and your local building department can tell you exactly what they need.

Tip: Setback rules, lot coverage limits and HOA rules can restrict where and how large a sunroom may be. Check these before you collect quotes, so you do not pay for a design that cannot be approved.

How to Keep Your Sunroom Budget Under Control

  • Decide on three-season or four-season first and get all quotes for the same type.
  • Use a simple rectangular footprint with a roof that ties cleanly into the existing roof line.
  • Reuse what you have, such as a sound patio slab or deck structure, if a professional confirms it is suitable.
  • Choose standard window and door sizes instead of custom shapes.
  • Combine glass with solid wall sections to reduce glazing costs and overheating.
  • Get at least three written quotes based on identical drawings.
Single-story ranch house with wraparound porch designed in Plan7Architect, front view 2
Single-story ranch house with wraparound porch designed in Plan7Architect, front view 2

Plan Your Sunroom Yourself Before You Get Quotes

The most reliable way to get comparable quotes is to give every contractor the same set of plans. If one builder prices a 12 by 14 ft (about 3.7 by 4.3 m) room with three windows and another prices a slightly larger room with a different roof, the numbers cannot be compared. Exact plans with dimensions, window and door positions and the roof connection also reduce the risk of costly change orders once construction has started.

With Plan7Architect you can draw your existing house and the planned sunroom with exact wall lengths, place windows and doors, add the roof and check the result in 3D from every side. The living area calculation shows how much floor area the new room adds, and the plans can be printed to scale or exported as PDF for contractors. More ideas for glazed additions are in the article on planning a winter garden floor plan, and the guide on house extension costs in the US helps if your sunroom turns into a larger addition.

Design Your Sunroom Addition with Plan7Architect

With Plan7Architect Pro, you can create professional floor plans for your sunroom addition, from a compact three-season room to a fully insulated four-season room. Draw the walls, glass areas, doors and the roof connection to the house, compare different sizes and see every variant instantly in 3D. You can work in feet and inches or in metric units and export your plans as PDF, DWG or DXF for contractors and the permit office. Every purchase includes a 14-day right of withdrawal, so you can simply cancel your purchase by email if the software is not right for you.

Plan your project with Plan7Architect

Plan7Architect Pro

Plan7Architect Pro 5 for Original price was: $259.99.Current price is: $99.99.

You don’t need any prior experience because the software has been specifically designed for beginners. The planning process is carried out in 5 simple steps:

1. Draw Walls

Create your 2D floor plan by accurately drawing and adjusting rooms and walls for your home design.
Create your 2D floor plan by accurately drawing and adjusting rooms and walls for your home design.

2. Windows & Doors

Optimize your space layout with perfectly fitting door and window elements.
Optimize your space layout with perfectly fitting door and window elements.

3. Floors & Roof

Visualize different levels and roof types for your home design.
Visualize different levels and roof types for your home design.

4. Textures & 3D Objects

Choose materials and textures to customize floors, walls, and 3D objects individually for a realistic representation of your design.
Choose materials and textures to customize floors, walls, and 3D objects individually for a realistic representation of your design.

5. Plan for the Building Permit

Sections and views for the building application can be created with Plan7Architect (1)
Create professional construction drawings with elevations, sections, and complete plan compilations.

6. Export the Floor Plan as a 3D Model for Twinmotion

Visualize your project with cutting-edge 3D technology and create high-quality image renderings and videos using Twinmotion by Epic Games.
Visualize your project with cutting-edge 3D technology and create high-quality image renderings and videos using Twinmotion by Epic Games.

 

  • – Compliant with international construction standards
  • – Usable on 3 PCs simultaneously
  • – Option for consultation with an architect
  • – Comprehensive user manual
  • – Regular updates
  • – Video tutorials
  • – Millions of 3D objects available

Why 85,000+ Home Planners Choose Plan7Architect

Why choose Plan7Architect over other home design tools?

14-Day Money-Back Guarantee
No questions asked. Just email us within 14 days if you’re not satisfied.
One-time payment – no subscription
Own the software forever. No hidden costs. No monthly fees. Updates are optional.
Based on $2,500 professional architecture software
Plan7Architect is an optimized version — used by professionals and private users alike.
Supports international building standards
Adaptable to US, UK, Canadian, Australian, and European requirements.
Works offline – use on up to 3 devices
No internet required. Install on up to 3 computers – ideal for home and office use.
Metric & imperial units
Switch freely between feet/inches or meters/centimeters — perfect for global use.
++
All key export/import formats included
DWG, DXF, OBJ, 3DS, STL, PDF, image export/import, and SketchUp import — for smooth collaboration.
ii
Create real building permit documents
Generate floor plans, elevations, cross-sections, and full construction drawings.
Supports wood framing for walls and roofs
Design wall and roof structures, gables, dormers, and freely constructed wood frameworks.
Easy learning curve with full support
Includes video tutorials, ticket system, detailed PDF manual, sample projects, and access to our customer forum.
Excellent verified reviews
Top ratings on Trusted Shops and Amazon.
Ongoing development – 3–4 updates per year
Always improving, with a modern 3D engine and regular feature upgrades.

Watch how a complete house is planned from start to finish – in under 25 minutes

Detailed House Planning (25 Min)

Small Home Planning Demo (12 Min)

Short House Planning Demo (6 Min)

AI with Plan7Architect

Your Plan + AI

Plan your house in Plan7Architect and take it further with today’s AI tools. Your design stays exactly as you planned it.

3D view of a villa designed in Plan7ArchitectAI rendering of the same Plan7Architect villa

Plan7ArchitectAI

Photorealistic AI Renderings

Turn any 3D view of your Plan7Architect project into a photorealistic image in seconds.

How to render your design with AI →Free prompt generator with 11 examples →

AI Videos of Your HouseNew

A short film like real drone footage, made from your Plan7Architect 3D views.

How to create an AI video of your house →

Material list and cost estimate from a Plan7Architect plan with ChatGPT or Claude

Material List & Cost Estimate

Export your plan as DXF and let ChatGPT or Claude create quantities and a cost estimate.

How to create a material list →

Hand-drawn floor plan digitized with AI and imported into Plan7Architect

Digitize Floor Plans with AI

Paper, PDF or photo to an exact DXF file you can trace in Plan7Architect.

How to digitize floor plans →

The 3 Plan7Architects

$79.99

Suitable for small hobby projects

No garden planning and only limited floor plan creation with few wall types

7 reviews
★★★★★
$89.99

For medium-sized projects

Unrestricted floor plan creation & garden planning

No export options for your architect and no plans for building permit applications

11 reviews
★★★★★
Original price was: $259.99.Current price is: $99.99.

For projects of any size

Import & export for working with an architect

Create plans for real building permit applications

Much larger range of features than the other two versions

111 reviews
★★★★★
BestsellerPlan7Architect Pro 5Pro
Price
$79.99
$89.99
Original price was: $259.99.Current price is: $99.99.
Project size
Small hobby projects
Medium-sized
Any size
Floor plan creation
Limited
Garden planning
Import & export for your architect
Plans for building permit applications
Customer reviews
★ 4.77 reviews
★ 4.811 reviews
★ 4.8111 reviews

Verified Customer Reviews

Verified Customer Reviews

Trusted Shops:

Home » House Construction Costs » Sunroom Addition Cost: Prices by Type and Size
Select your currency