Skip to main content

Container Home Plans: Layouts for 1 to 4 Containers

Most container home plans are built from standard 20-foot or 40-foot shipping containers, which are about 8 feet (about 2.44 m) wide on the outside. One 40-foot container gives about 320 square feet (about 30 square meters) of footprint, enough for a studio or one-bedroom home, while two containers make roughly 640 square feet (about 59 square meters) and four containers about 1,280 square feet (about 119 square meters) for a three- or four-bedroom house.

A good container layout works with the fixed 8-foot module instead of against it: long rooms along the container, wide openings where containers join, and bathrooms and kitchens placed so that the structure needs as few cuts as possible. In my experience, the container count matters less than how cleverly the containers are combined, stacked or offset to create larger rooms, covered outdoor space and good daylight.

Modern two-story house with hip roof designed in Plan7Architect, corner view
Modern two-story house with hip roof designed in Plan7Architect, corner view

Container Sizes at a Glance

Containers come in a few standard sizes. High cube containers are about one foot (about 30 cm) taller than standard ones, which leaves more headroom after insulation and ceiling finishes, so most residential projects use them.

Container Exterior size Footprint
20-foot standard 20 by 8 feet, 8 ft 6 in high (about 6.1 by 2.44 m, 2.59 m high) 160 square feet (about 15 square meters)
40-foot standard 40 by 8 feet, 8 ft 6 in high (about 12.2 by 2.44 m, 2.59 m high) 320 square feet (about 30 square meters)
40-foot high cube 40 by 8 feet, 9 ft 6 in high (about 12.2 by 2.44 m, 2.90 m high) 320 square feet (about 30 square meters)

The interior width of a standard container is only about 7 feet 9 inches (about 2.36 m), and insulation and wall finishes reduce it further. This is why a single container works well for kitchens, bathrooms and bedrooms along its length, but living rooms usually need two containers side by side.

Container Home Plan Layout Ideas

1. Single 20-Foot Studio

Size: about 160 square feet (about 15 square meters).
Rooms: sleeping and living area, compact kitchenette along one wall, shower room at one end.
Suits: guest houses, backyard offices and weekend cabins.
Tip: put the bathroom at the closed end and the glass doors at the original cargo door end to keep the structure strong.

2. Single 40-Foot One-Bedroom

Size: about 320 square feet (about 30 square meters).
Rooms: bedroom at one end, bathroom in the middle, kitchen and living area at the other end.
Suits: singles, couples and accessory dwellings.
Tip: placing the bathroom between bedroom and kitchen creates a natural sound buffer and keeps plumbing in one zone.

3. Two 20-Foot Containers in an L-Shape

Size: about 320 square feet (about 30 square meters) plus a corner deck.
Rooms: living and kitchen in one container, bedroom and bath in the other, deck in the inside corner.
Suits: vacation homes where outdoor living matters.
Tip: orient the open corner toward the sun or the view.

4. Two 40-Foot Containers Side by Side

Size: about 640 square feet (about 59 square meters), roughly 16 by 40 feet (about 4.9 by 12.2 m).
Rooms: open kitchen, dining and living area across both containers, two bedrooms and one bath.
Suits: small families and full-time living on a single level.
Tip: removing most of the shared walls creates a 16-foot (about 4.9 m) wide living room, but the openings need structural reinforcement designed by an engineer.

5. Two 40-Foot Containers Stacked

Size: about 640 square feet (about 59 square meters) on two floors.
Rooms: kitchen, living area and half bath downstairs; two bedrooms and a bath upstairs; exterior or interior stairs.
Suits: narrow lots and sites with a view.
Tip: an exterior stair saves interior floor area in a narrow container; see our guide on planning a container house yourself.

Furnished open floor plan of a single-story house in 3D designed in Plan7Architect, overview 3
Furnished open floor plan of a single-story house in 3D designed in Plan7Architect, overview 3

6. Three 40-Foot Containers Side by Side

Size: about 960 square feet (about 89 square meters), roughly 24 by 40 feet (about 7.3 by 12.2 m).
Rooms: open living area in the center container, two or three bedrooms and two baths in the outer containers.
Suits: families who want a conventional house size on one level.
Tip: keep bedrooms in the outer containers, where windows can be placed in the long walls.

7. Three Containers Around a Courtyard

Size: about 960 square feet (about 89 square meters) plus a courtyard or deck.
Rooms: living wing, bedroom wing and kitchen or studio wing arranged in a U-shape.
Suits: warm climates and rural lots.
Tip: a roof over part of the courtyard creates a covered outdoor room that connects all three containers.

8. Four Containers on Two Floors

Size: about 1,280 square feet (about 119 square meters) on two floors.
Rooms: open living, dining and kitchen across two containers downstairs; three bedrooms and two baths upstairs.
Suits: families who want a full-size house with a modest footprint.
Tip: stack the upstairs bathrooms above the downstairs kitchen or bath to keep plumbing runs short.

9. Four Containers with Offset Upper Floor

Size: about 1,280 square feet (about 119 square meters) plus covered terrace.
Rooms: two containers on the ground floor, two above rotated or shifted to create a covered terrace below and a roof deck on top.
Suits: owners who want a striking modern design.
Tip: cantilevers and rotated containers change the load paths, so plan with a structural engineer from the start.

Comparing Container Counts

Containers Typical footprint Typical layout
One 20-foot 160 square feet (about 15 square meters) Studio, office, guest room
One 40-foot 320 square feet (about 30 square meters) One bedroom
Two 40-foot 640 square feet (about 59 square meters) Two bedrooms, one or two baths
Three 40-foot 960 square feet (about 89 square meters) Two or three bedrooms, two baths
Four 40-foot 1,280 square feet (about 119 square meters) Three or four bedrooms, two baths
Tip: Draw the insulated wall build-up into your plan from the beginning. A few inches of insulation and finish on each side make a noticeable difference in an interior that starts at only about 7 feet 9 inches (about 2.36 m) wide.

What to Consider Before Choosing a Plan

  • Lot and access: containers are delivered by truck and often placed by crane, so the site needs enough space and a clear path.
  • Orientation and climate: steel heats up in the sun and conducts cold. Plan shading, roof overhangs and insulation for your climate.
  • Foundation: container homes are often placed on concrete piers, strip footings or a slab. The right choice depends on the soil and frost depth; our guide on planning a foundation explains the basics.
  • Budget: every large opening and every cut wall adds steel reinforcement and labor, so simple layouts are usually cheaper.
  • Local codes and zoning: some areas have specific rules for container buildings or restrict them in certain zones. Check with your local building and planning departments early.

Stock Plan or Your Own Design?

Stock container plans and container manufacturers’ standard models can be a quick starting point, but most projects need changes for the site, the view and the climate. Our comparison of stock house plans vs. designing your own covers the pros and cons.

Transparent 3D view of a ranch house with porch designed in Plan7Architect, top view
Transparent 3D view of a ranch house with porch designed in Plan7Architect, top view

Planning Your Container Home Yourself

Container homes are a good fit for planning software because everything is based on fixed modules. With Plan7Architect, you can create walls with your own layer structure, save them to the catalog and reuse them for every container, enter exact lengths so that each module is precisely 8 by 40 feet, and place windows and doors with automatic openings. Unlimited floors make stacked and offset designs easy to model, flat roofs and roof decks can be added, and the 3D view shows the result immediately. If you want to compare tools first, see our overview of the best container home design software.

Design Your Container Home with Plan7Architect

With Plan7Architect Pro, you can create professional floor plans for a container home: one to four or more containers side by side, stacked or offset, with insulated walls, large openings, kitchens, bathrooms, stairs, decks, roof terraces and foundations, all visible instantly in 2D and 3D. You can work in feet and inches or in metric units and export your plans as PDF, DWG or DXF. Every purchase includes a 14-day right of withdrawal, so you can simply cancel your purchase by email if the software is not right for you.

Plan your project with Plan7Architect

Plan7Architect Pro

Plan7Architect Pro 5 for Original price was: $259.99.Current price is: $99.99.

You don’t need any prior experience because the software has been specifically designed for beginners. The planning process is carried out in 5 simple steps:

1. Draw Walls

Create your 2D floor plan by accurately drawing and adjusting rooms and walls for your home design.
Create your 2D floor plan by accurately drawing and adjusting rooms and walls for your home design.

2. Windows & Doors

Optimize your space layout with perfectly fitting door and window elements.
Optimize your space layout with perfectly fitting door and window elements.

3. Floors & Roof

Visualize different levels and roof types for your home design.
Visualize different levels and roof types for your home design.

4. Textures & 3D Objects

Choose materials and textures to customize floors, walls, and 3D objects individually for a realistic representation of your design.
Choose materials and textures to customize floors, walls, and 3D objects individually for a realistic representation of your design.

5. Plan for the Building Permit

Sections and views for the building application can be created with Plan7Architect (1)
Create professional construction drawings with elevations, sections, and complete plan compilations.

6. Export the Floor Plan as a 3D Model for Twinmotion

Visualize your project with cutting-edge 3D technology and create high-quality image renderings and videos using Twinmotion by Epic Games.
Visualize your project with cutting-edge 3D technology and create high-quality image renderings and videos using Twinmotion by Epic Games.

 

  • – Compliant with international construction standards
  • – Usable on 3 PCs simultaneously
  • – Option for consultation with an architect
  • – Comprehensive user manual
  • – Regular updates
  • – Video tutorials
  • – Millions of 3D objects available

Why 85,000+ Home Planners Choose Plan7Architect

Why choose Plan7Architect over other home design tools?

14-Day Money-Back Guarantee
No questions asked. Just email us within 14 days if you’re not satisfied.
One-time payment – no subscription
Own the software forever. No hidden costs. No monthly fees. Updates are optional.
Based on $2,500 professional architecture software
Plan7Architect is an optimized version — used by professionals and private users alike.
Supports international building standards
Adaptable to US, UK, Canadian, Australian, and European requirements.
Works offline – use on up to 3 devices
No internet required. Install on up to 3 computers – ideal for home and office use.
Metric & imperial units
Switch freely between feet/inches or meters/centimeters — perfect for global use.
++
All key export/import formats included
DWG, DXF, OBJ, 3DS, STL, PDF, image export/import, and SketchUp import — for smooth collaboration.
ii
Create real building permit documents
Generate floor plans, elevations, cross-sections, and full construction drawings.
Supports wood framing for walls and roofs
Design wall and roof structures, gables, dormers, and freely constructed wood frameworks.
Easy learning curve with full support
Includes video tutorials, ticket system, detailed PDF manual, sample projects, and access to our customer forum.
Excellent verified reviews
Top ratings on Trusted Shops and Amazon.
Ongoing development – 3–4 updates per year
Always improving, with a modern 3D engine and regular feature upgrades.

Watch how a complete house is planned from start to finish – in under 25 minutes

Detailed House Planning (25 Min)

Small Home Planning Demo (12 Min)

Short House Planning Demo (6 Min)

AI with Plan7Architect

Your Plan + AI

Plan your house in Plan7Architect and take it further with today’s AI tools. Your design stays exactly as you planned it.

3D view of a villa designed in Plan7ArchitectAI rendering of the same Plan7Architect villa

Plan7ArchitectAI

Photorealistic AI Renderings

Turn any 3D view of your Plan7Architect project into a photorealistic image in seconds.

How to render your design with AI →Free prompt generator with 11 examples →

AI Videos of Your HouseNew

A short film like real drone footage, made from your Plan7Architect 3D views.

How to create an AI video of your house →

Material list and cost estimate from a Plan7Architect plan with ChatGPT or Claude

Material List & Cost Estimate

Export your plan as DXF and let ChatGPT or Claude create quantities and a cost estimate.

How to create a material list →

Hand-drawn floor plan digitized with AI and imported into Plan7Architect

Digitize Floor Plans with AI

Paper, PDF or photo to an exact DXF file you can trace in Plan7Architect.

How to digitize floor plans →

The 3 Plan7Architects

$79.99

Suitable for small hobby projects

No garden planning and only limited floor plan creation with few wall types

7 reviews
★★★★★
$89.99

For medium-sized projects

Unrestricted floor plan creation & garden planning

No export options for your architect and no plans for building permit applications

11 reviews
★★★★★
Original price was: $259.99.Current price is: $99.99.

For projects of any size

Import & export for working with an architect

Create plans for real building permit applications

Much larger range of features than the other two versions

111 reviews
★★★★★
BestsellerPlan7Architect Pro 5Pro
Price
$79.99
$89.99
Original price was: $259.99.Current price is: $99.99.
Project size
Small hobby projects
Medium-sized
Any size
Floor plan creation
Limited
Garden planning
Import & export for your architect
Plans for building permit applications
Customer reviews
★ 4.77 reviews
★ 4.811 reviews
★ 4.8111 reviews

Verified Customer Reviews

Verified Customer Reviews

Trusted Shops:

Home » Floor Plan Guide » Container Home Plans: Layouts for 1 to 4 Containers
Select your currency