Skip to main content

Multi-Generational Home Plans: Layout Ideas for Living Together

Good multi-generational home plans usually range from about 2,500 to 4,000 square feet (about 230 to 370 square meters) and give each generation a private zone with its own bedroom, bathroom and sitting area, while sharing the kitchen, dining and outdoor space. The best layouts add a separate entrance for the second household, keep the private suites apart from each other, and make at least one suite fully usable without stairs.

The exact size depends on how independent the households want to be. A simple in-law suite inside a family house can work with 400 to 600 square feet (about 37 to 56 square meters) of extra space, while two complete apartments under one roof, each with its own kitchen, quickly push a home past 3,500 square feet (about 325 square meters). In my experience, the most successful multi-generational homes are the ones where everyone agreed early on how much they want to share and how much privacy they need.

Furnished apartment floor in a cutaway of a multi-family house designed in Plan7Architect, close-up
Furnished apartment floor in a cutaway of a multi-family house designed in Plan7Architect, close-up

Multi-Generational Home Plan Ideas

The following layouts are the ones I see work best in practice. Each one balances privacy and togetherness in a different way.

1. Main-Floor In-Law Suite

Size: suite of 400 to 600 square feet (about 37 to 56 square meters) in a house of 2,400 to 3,200 square feet (about 220 to 300 square meters).
Rooms: bedroom, accessible bathroom, small sitting area, walk-in closet, often a kitchenette.
Suits: families with one or two older parents who want privacy but share meals.
Tip: place the suite at the opposite end of the house from the main bedroom, with the shared living area in between as a buffer.

2. Dual Primary Suites

Size: 2,600 to 3,400 square feet (about 240 to 315 square meters).
Rooms: two equal primary suites, each with bathroom and walk-in closet, plus additional bedrooms for children.
Suits: two adult couples, for example parents and adult children, who want equal standing in the house.
Tip: put one suite on the ground floor and one upstairs, so the ground-floor suite remains usable if mobility becomes an issue.

3. Home with a Separate Entrance Apartment

Size: apartment of 600 to 900 square feet (about 56 to 84 square meters) in a total of 3,000 to 4,000 square feet (about 280 to 370 square meters).
Rooms: one-bedroom apartment with its own kitchen, bathroom and living room, connected to the main house by a lockable door.
Suits: households that want to live independently but help each other daily.
Tip: give the apartment its own entrance from the side or rear, and a connecting door to a hallway or mudroom rather than directly into the main living room.

4. Next-Gen Wing

Size: wing of 700 to 1,000 square feet (about 65 to 93 square meters).
Rooms: bedroom, bathroom, living area, kitchenette, laundry, private patio.
Suits: larger lots where an L-shaped or U-shaped house is possible.
Tip: orient the wing so that its patio does not look directly into the main living room or terrace of the other household.

5. Duplex-Style Home Under One Roof

Size: two units of 1,200 to 1,800 square feet (about 110 to 170 square meters) each.
Rooms: two complete homes with kitchens, living rooms, bedrooms and bathrooms, sharing a wall, a garden or a garage.
Suits: two families with children, or siblings who buy together.
Tip: plan sound insulation in the party wall and between floors from the start. It is very hard to improve later.

6. Ground-Floor Parents, Upstairs Family

Size: 2,800 to 3,600 square feet (about 260 to 335 square meters) on two floors.
Rooms: ground floor with parents suite, kitchen, dining and living; upper floor with the family bedrooms, a second living room and bathrooms.
Suits: families where grandparents help with childcare.
Tip: add a small upstairs family room so that the younger generation has a place to retreat in the evening.

7. Walkout Basement Suite

Size: suite of 700 to 1,200 square feet (about 65 to 110 square meters) in the lower level.
Rooms: bedroom, bathroom, living room, kitchenette, direct exit to the garden.
Suits: sloped lots and young adults or caregivers who are comfortable with stairs to the main floor.
Tip: make sure the bedroom has an egress window or door that meets local rules, and plan good daylight on the walkout side.

8. Detached Guest House or ADU

Size: 400 to 1,000 square feet (about 37 to 93 square meters) next to a main house.
Rooms: studio or one bedroom, bathroom, kitchen, small porch.
Suits: families who want the most privacy while staying on the same lot.
Tip: connect the two buildings with a covered path. It is used far more often than most people expect, especially in bad weather.

9. Courtyard Layout with Shared Center

Size: 3,000 to 4,000 square feet (about 280 to 370 square meters).
Rooms: private suites in separate wings around a central courtyard, with the shared kitchen and great room on one side.
Suits: warm climates and families who like to meet outdoors.
Tip: keep the courtyard visible from the kitchen. It becomes the natural place where the generations meet.

Furnished apartment floor in a cutaway of a multi-family house designed in Plan7Architect, overview
Furnished apartment floor in a cutaway of a multi-family house designed in Plan7Architect, overview

Typical Room Sizes in a Multi-Generational Home

Space Typical size Notes
In-law bedroom 12 by 14 feet to 14 by 16 feet (about 3.7 by 4.3 m to 4.3 by 4.9 m) Room for a bed with space to turn a wheelchair beside it
Accessible bathroom 8 by 10 feet to 10 by 12 feet (about 2.4 by 3 m to 3 by 3.7 m) Curbless shower and a clear turning circle
Suite sitting room 10 by 12 feet to 12 by 14 feet (about 3 by 3.7 m to 3.7 by 4.3 m) Enough for a sofa, armchair and TV
Kitchenette 6 by 8 feet to 8 by 10 feet (about 1.8 by 2.4 m to 2.4 by 3 m) Sink, small refrigerator, two burners or microwave
Shared kitchen 14 by 16 feet to 16 by 20 feet (about 4.3 by 4.9 m to 4.9 by 6.1 m) Two work zones help when two cooks use it
Shared dining area 12 by 16 feet to 14 by 18 feet (about 3.7 by 4.9 m to 4.3 by 5.5 m) Table for 8 to 10 people

For detailed bathroom dimensions, including accessible layouts, see our guide on how big a bathroom should be.

Accessibility and Aging in Place

Even if everyone is healthy today, a multi-generational home should be ready for the years ahead. Commonly recommended features are:

  • Step-free entrance to at least one suite, ideally with a covered approach.
  • Wider doors of 36 inches (about 91 cm) to the suite, bathroom and main living areas.
  • Hallways of about 42 to 48 inches (about 107 to 122 cm) so that a walker or wheelchair passes comfortably.
  • A clear turning circle of 5 feet (about 1.5 m) in the bathroom and next to the bed.
  • Curbless showers with blocking in the walls for grab bars installed later.
  • Laundry on the same level as the accessible suite.

These are planning guidelines, not legal requirements for private homes. If you need the house to meet specific accessibility standards, check the requirements in your area.

What to Consider Before Choosing a Plan

Lot Size and Shape

Wings and detached suites need a wide lot, while narrow lots often push the second household upstairs or into a basement. Check setbacks and maximum lot coverage before you fall in love with a single-story layout.

Orientation

Each household should get good daylight. Give the suites windows that face the garden or the sunny side, and avoid placing one household where it only looks at the side wall of a neighbor.

Budget

Every extra kitchen and bathroom adds real cost. A suite with a kitchenette instead of a full kitchen often gives most of the independence at a fraction of the price.

Local Codes and Zoning

Some areas treat a second kitchen or a separate entrance as a second dwelling unit, with different rules for permits, parking, utilities and taxes. Check with your local planning department how your design will be classified before you finalize it.

Tip: Sit down with every adult who will live in the house and list what must be private and what can be shared, for example kitchen, laundry, garage and garden. That list decides the layout far more than the total square footage.

Stock Plan or Your Own Design?

Stock plans for multi-generational homes exist, but family situations are very different, and a plan made for someone else rarely matches who needs privacy, accessibility or a separate entrance in your case. Many families start with a stock plan and modify it heavily, which can cost almost as much as a custom design. Our comparison of stock house plans vs. designing your own explains the costs and trade-offs.

Transparent 3D model of a multi-family house with mansard roof designed in Plan7Architect, top view
Transparent 3D model of a multi-family house with mansard roof designed in Plan7Architect, top view

Planning a Multi-Generational Home Yourself

Drawing the plan yourself is the easiest way to get everyone involved. You can show each family member their own suite in 3D, test where the separate entrance goes, compare a ground-floor suite with a basement apartment as separate plan variants, and see right away whether a wheelchair turns around in the bathroom with the furniture in place. Our step-by-step article on how to plan a multigenerational house floor plan walks through the process, and the overview of multigenerational house pros and cons helps if you are still deciding.

Design Your Multi-Generational Home with Plan7Architect

With Plan7Architect Pro, you can create professional floor plans for a home shared by several generations: in-law suites, dual primary suites, separate entrances, apartments with their own kitchens, accessible bathrooms, stairs, basements and courtyards. Furnish every room, check the living area of each household and walk through the house in 3D before you build. You can work in feet and inches or metric units and export your plans as PDF, DWG or DXF for your builder. Every purchase includes a 14-day right of withdrawal, so you can simply cancel your purchase by email if the software is not right for you.

Plan your project with Plan7Architect

Plan7Architect Pro

Plan7Architect Pro 5 for Original price was: $259.99.Current price is: $99.99.

You don’t need any prior experience because the software has been specifically designed for beginners. The planning process is carried out in 5 simple steps:

1. Draw Walls

Create your 2D floor plan by accurately drawing and adjusting rooms and walls for your home design.
Create your 2D floor plan by accurately drawing and adjusting rooms and walls for your home design.

2. Windows & Doors

Optimize your space layout with perfectly fitting door and window elements.
Optimize your space layout with perfectly fitting door and window elements.

3. Floors & Roof

Visualize different levels and roof types for your home design.
Visualize different levels and roof types for your home design.

4. Textures & 3D Objects

Choose materials and textures to customize floors, walls, and 3D objects individually for a realistic representation of your design.
Choose materials and textures to customize floors, walls, and 3D objects individually for a realistic representation of your design.

5. Plan for the Building Permit

Sections and views for the building application can be created with Plan7Architect (1)
Create professional construction drawings with elevations, sections, and complete plan compilations.

6. Export the Floor Plan as a 3D Model for Twinmotion

Visualize your project with cutting-edge 3D technology and create high-quality image renderings and videos using Twinmotion by Epic Games.
Visualize your project with cutting-edge 3D technology and create high-quality image renderings and videos using Twinmotion by Epic Games.

 

  • – Compliant with international construction standards
  • – Usable on 3 PCs simultaneously
  • – Option for consultation with an architect
  • – Comprehensive user manual
  • – Regular updates
  • – Video tutorials
  • – Millions of 3D objects available

Why 85,000+ Home Planners Choose Plan7Architect

Why choose Plan7Architect over other home design tools?

14-Day Money-Back Guarantee
No questions asked. Just email us within 14 days if you’re not satisfied.
One-time payment – no subscription
Own the software forever. No hidden costs. No monthly fees. Updates are optional.
Based on $2,500 professional architecture software
Plan7Architect is an optimized version — used by professionals and private users alike.
Supports international building standards
Adaptable to US, UK, Canadian, Australian, and European requirements.
Works offline – use on up to 3 devices
No internet required. Install on up to 3 computers – ideal for home and office use.
Metric & imperial units
Switch freely between feet/inches or meters/centimeters — perfect for global use.
++
All key export/import formats included
DWG, DXF, OBJ, 3DS, STL, PDF, image export/import, and SketchUp import — for smooth collaboration.
ii
Create real building permit documents
Generate floor plans, elevations, cross-sections, and full construction drawings.
Supports wood framing for walls and roofs
Design wall and roof structures, gables, dormers, and freely constructed wood frameworks.
Easy learning curve with full support
Includes video tutorials, ticket system, detailed PDF manual, sample projects, and access to our customer forum.
Excellent verified reviews
Top ratings on Trusted Shops and Amazon.
Ongoing development – 3–4 updates per year
Always improving, with a modern 3D engine and regular feature upgrades.

Watch how a complete house is planned from start to finish – in under 25 minutes

Detailed House Planning (25 Min)

Small Home Planning Demo (12 Min)

Short House Planning Demo (6 Min)

AI with Plan7Architect

Your Plan + AI

Plan your house in Plan7Architect and take it further with today’s AI tools. Your design stays exactly as you planned it.

3D view of a villa designed in Plan7ArchitectAI rendering of the same Plan7Architect villa

Plan7ArchitectAI

Photorealistic AI Renderings

Turn any 3D view of your Plan7Architect project into a photorealistic image in seconds.

How to render your design with AI →Free prompt generator with 11 examples →

AI Videos of Your HouseNew

A short film like real drone footage, made from your Plan7Architect 3D views.

How to create an AI video of your house →

Material list and cost estimate from a Plan7Architect plan with ChatGPT or Claude

Material List & Cost Estimate

Export your plan as DXF and let ChatGPT or Claude create quantities and a cost estimate.

How to create a material list →

Hand-drawn floor plan digitized with AI and imported into Plan7Architect

Digitize Floor Plans with AI

Paper, PDF or photo to an exact DXF file you can trace in Plan7Architect.

How to digitize floor plans →

The 3 Plan7Architects

$79.99

Suitable for small hobby projects

No garden planning and only limited floor plan creation with few wall types

7 reviews
★★★★★
$89.99

For medium-sized projects

Unrestricted floor plan creation & garden planning

No export options for your architect and no plans for building permit applications

11 reviews
★★★★★
Original price was: $259.99.Current price is: $99.99.

For projects of any size

Import & export for working with an architect

Create plans for real building permit applications

Much larger range of features than the other two versions

111 reviews
★★★★★
BestsellerPlan7Architect Pro 5Pro
Price
$79.99
$89.99
Original price was: $259.99.Current price is: $99.99.
Project size
Small hobby projects
Medium-sized
Any size
Floor plan creation
Limited
Garden planning
Import & export for your architect
Plans for building permit applications
Customer reviews
★ 4.77 reviews
★ 4.811 reviews
★ 4.8111 reviews

Verified Customer Reviews

Verified Customer Reviews

Trusted Shops:

Home » Floor Plan Guide » Multi-Generational Home Plans: Layout Ideas for Living Together
Select your currency